-
الإضافة ： المبنى 2، رقم 8 طريق هينغزوتانغ 8، دونغقوان
-
الهاتف ： الهاتف +86 135 4224 3751
المستهلك
Thermal interface materials (TIMs)—pads, gels, greases, and phase change materials—reduce thermal resistance from CPU/GPU/SoC to heat sinks, helping consumer devices run cooler, more stable, and longer.
Explore Sheen’s silicone/non-silicone thermal pads, thermal gels, and gap-filling solutions for consumer electronics.
لمحة عامة
Router Thermal Materials Applications
High-throughput routers and gateways generate concentrated heat on the network SoC, RF front-end, PMICs, and power stages. Using thermal interface materials (TIMs)—such as silicone/non-silicone thermal pads, gap fillers, and thermal gels—helps create low-thermal-resistance paths from hotspots to heat sinks or the enclosure.
التحسين من أجل hotspot reduction, RF stability, and safe enclosure temperature by combining compliant gap-filling materials for uneven stacks with higher-performance TIMs where contact pressure is available.
وحدة التحكم في الألعاب تطبيقات المواد الحرارية
Game consoles sustain high power draw from the APU/SoC, VRM, memory, and power components, often in compact airflow-limited designs. Thermal pads, thermal gels, thermal grease, and phase change materials (PCM) are commonly used to improve contact, reduce thermal resistance, and support long-duration gaming loads.
The goal is stable frame-rate performance without throttling, achieved by balancing high thermal conductivity with compressibility and reworkability across mixed-height components.
Laptop Thermal Materials Applications
Modern laptops pack dense heat sources—CPU/GPU, VRMs, SSDs, and charging ICs—into thin mechanical stacks with tight Z-height constraints. Thermal interface materials (TIMs) such as thermal pads (gap fillers), thermal gel, thermal grease, and PCM improve heat transfer to heat pipes, vapor chambers, and chassis spreaders.
Design priorities include lower junction temperature, quieter cooling, و reliable performance in thin-and-light systems, using compliant materials to bridge gaps while maintaining long-term durability under cycling.
CellPhone Thermal Materials Applications
Smartphones experience burst heat from the application processor (SoC), RF transceiver, PMICs, fast-charging circuits, and camera modules. Ultra-thin thermal pads, thermal gels, and heat-spreading interface solutions help move heat into mid-frames or graphite layers to reduce hotspots.
التحسين من أجل hotspot suppression and lower surface temperature rise, while meeting low outgassing, tight tolerances, and high-volume assembly stability.
Optional: In RF-dense designs, EMI absorbing materials can support signal integrity while managing localized heat.
تطبيقات المواد الحرارية للطائرات بدون طيار
Drones combine high-load electronics—flight controller SoC, power modules, motor drivers, GPS/RF, and battery management—with vibration and wide ambient temperature swings. Thermal pads, thermal gels, and silicone foam help maintain stable interfaces, fill gaps, and protect assemblies from shock while improving heat flow to housings.
Key targets are temperature stability, weight-conscious thermal design, and long-term reliability, especially during continuous flight and rapid power transitions.
المزايا
تحسين الأداء الحراري باستخدام المواد اللامعة
Cooler Hotspots, Higher Performance Stability
Reduce hotspot temperature and improve heat spreading for routers, game consoles, laptops, phones, and drones. Helps lower thermal throttling, improve frame-rate/CPU stability, and protect key ICs.
Longer Device Life, Lower Failure Risk
High-reliability TIMs maintain consistent contact and thermal performance over time. Supports reduced thermal stress, fewer rework/returns, and better long-term stability in compact builds.
دفعات متناسقة، وتأهيل أسهل
Tight thickness tolerance, stable compressibility, and repeatable adhesion/lamination behavior. Cuts engineering re-validation effort and minimizes batch-to-batch variation for procurement confidence.
أخذ عينات أسرع، إنتاج ضخم قابل للتطوير
From die-cut prototypes to volume orders with stable yield and controlled processes. Shortens development cycles, improves on-time delivery, and supports multi-SKU/region programs.
المنتجات ذات الصلة
Explore the thermal interface and functional materials commonly used in this application.
وسادات حرارية
وسادات حرارية ناعمة وقابلة للتطابق لملء الفراغات ونقل الحرارة بشكل موثوق في الإلكترونيات.
تصفح ›
الشحوم الحرارية
حلول الشحوم الحرارية عالية الكفاءة لوحدات المعالجة المركزية ووحدات الطاقة والتركيبات الصناعية.
تصفح ›
رغوة السيليكون
المواد الرغوية المستخدمة في العزل، والتوسيد، والعزل، والتطبيقات المانعة للحريق.
تصفح ›
الشريط الحراري
أشرطة حرارية مغلفة بـ PSA للتجميع السريع والترابط الحراري المتسق للواجهة الحرارية.
تصفح ›
أجهزة امتصاص الترددات الكهرومغناطيسية
مواد ماصة للتداخل الكهرومغناطيسي لتقليل التداخل وتحسين سلامة الإشارة في الإلكترونيات.
تصفح ›Explore Related Consumer Electronics Applications
وحدة التحكم في الألعاب
Improve APU/VRM thermal contact to prevent throttling during long gaming sessions.
كمبيوتر محمول
Optimize CPU/GPU/SSD cooling in thin stacks with reliable gap filling and durability.
الأسواق ذات الصلة
Explore related markets where thermal interface and functional materials improve cooling, insulation, and reliability.
