---
title: "Expert Guide to Non-Silicone Thermal Pad Materials and Applications"
id: "3065"
type: "post"
slug: "non-silicone-thermal-pad-applications"
published_at: "2026-04-30T08:49:36+00:00"
modified_at: "2026-04-30T08:51:50+00:00"
url: "https://www.sheenmaterials.com/ko/non-silicone-thermal-pad-applications/"
markdown_url: "https://www.sheenmaterials.com/ko/non-silicone-thermal-pad-applications.md"
excerpt: "When heat turns hardware into toast, a Non-Silicone Thermal Pad swoops in—cooler boards, cleaner optics, no meltdown drama."
taxonomy_category:
  - "Buyer's Guides"
taxonomy_post_tag:
  - "Non-Silicone Thermal Pad"
---

# Expert Guide to Non-Silicone Thermal Pad Materials and Applications

Heat is killing your hardware, and a Non-Silicone Thermal Pad fixes it without the messy silicone fallout.

In 2025, [광택 재질 engineers](https://www.sheenmaterials.com/ko/rd-center/)
 state in official materials that non-silicone formulations reduce siloxane migration and protect sensitive components.

That means cooler boards, cleaner optics, fewer warranty headaches, and steadier performance.

## What Are Non-Silicone Thermal Pad Types

**[Non-Silicone Thermal Pad solutions](https://www.sheenmaterials.com/ko/applications/auto/non-silicone-thermal-management/)** are gaining traction in electronics where silicone bleed just won’t cut it. By splitting the term into **Non-Silicone**, **열**, 및 **패드**, engineers focus on material chemistry, heat flow, and mechanical fit. Let’s break down the main types in plain language.

### Polymer Matrix with Ceramic Fillers

A **비실리콘 열 패드** built from **polymer** 그리고 **ceramic filler** blends is a classic **composite material** approach.

1. Material Composition 1.1 **Matrix** base
  - Forms the structural backbone
  - 유지 관리 **전기 절연**

```
1.2   Ceramic  particles

  Boost   thermal conductivity pad

  Support stable heat transfer
```

1. Functional Performance 2.1 Heat Path
  - IC → pad → heat sink
  - Reduced thermal resistance

```
2.2 Electrical Safety

   Strong dielectric strength

   Prevents short circuits
```

1. Application Fit
  - Power modules
  - Automotive ECUs
  - Industrial drives

AF Series Non-Silicone Thermal Pad Specifications

## AF Series Non-Silicone Thermal Pad Specifications

The AF Series covers a practical range of thermal conductivity, hardness, compression, and thickness options for EV battery systems,  
 automotive electronics, optical modules, and other precision electronic assemblies. The table below summarizes the typical thermal and physical parameters.

| 모델 | 열 전도성W/m-K | 열 저항℃-in²/W @ 50psi, 1mm | 두께mm | 일반적인 경도쇼어 00 | 압축@ 30psi, 1mm | 신장 | 작동 온도℃ |
| --- | --- | --- | --- | --- | --- | --- | --- |
| AF100 | 1.5 | 1.10 | 0.5-5.0 | 55 / 70 | 35% | 100% | -40 ~ 125 |
| AF300 | 2.0 | 0.80 | 0.5-5.0 | 55 / 70 | 30% | 70% | -40 ~ 125 |
| AF500 | 3.0 | 0.60 | 0.5-5.0 | 55 / 70 | 30% | 70% | -40 ~ 125 |
| AF600D | 4.0 | 0.40 | 0.5-5.0 | 55 / 70 | 30% | 50% | -40 ~ 120 |
| AF600 | 5.0 | 0.30 | 0.5-5.0 | 70 | 20% | 40% | -40 ~ 120 |
| AF600G | 6.0 | 0.25 | 0.5-5.0 | 70 | 20% | 40% | -40 ~ 120 |
| AF800 | 8.0 | 0.20 | 1.0-5.0 | 70 | 20% | 30% | -40 ~ 120 |
| AF1000 | 10.0 | 0.18 | 1.0-5.0 | 70 | 20% | 30% | -40 ~ 120 |

무결성 - 전문성 - 상생 - 사용자 중심  
광택

For brands like **광택 재질**, tuning the **폴리머 매트릭스** ratio means dialing in both [열 전도성](https://www.sheenmaterials.com/ko/tim/)
and insulation without silicone migration.

### Pure Graphite Thermal Pads

A **비실리콘 열 패드** made from **[graphite](https://www.sheenmaterials.com/ko/graphene-thermal-pads/)** relies on layered [carbon 시트](https://www.sheenmaterials.com/ko/carbon-fiber-thermal-pads/)
. The big win? **High conductivity** along the plane.

Key traits:

- **Anisotropic** heat flow
- Ultra**-thin** profile
- Naturally **flexible**

In LED panels and telecom boards, a graphite-based **[열 인터페이스 재료](https://www.sheenmaterials.com/ko/tim/)** spreads heat sideways fast. That’s heat dissipation done smart.

Still, it needs pairing with insulation layers since graphite conducts electricity. For tight stacks where height matters, this non-silicone thermal pad type keeps things slim and efficient.

### [질화 붕소](https://www.sheenmaterials.com/ko/bn-thermal-pads/) –Reinforced Elastomer Pads

이 **비실리콘 열 패드** mixes **boron nitride** into a soft **elastomer**.

1. Core Structure 1.1 Base Layer
  - Soft, **conformable** elastomer
  - Handles surface gaps

```
1.2 Reinforcement

Boron nitride particles
Raise thermal management capacity
```

1. Performance Benefits
  - Strong **electrical isolation**
  - Stable at **high temperatures**
  - Maintains compression set

2. Use Cases
  - EV battery controllers
  - Motor drives
  - Power conversion units

Because the pad is soft, it hugs uneven chips. That reduces air gaps. Less air, better heat flow. Sheen Technology often fine-tunes particle loading to balance softness with strength.

### Acrylic with Fiberglass Reinforcement

An acrylic-based **비실리콘 열 패드** reinforced by **fiberglass** focuses on structure.

1. Material Framework 1.1 **Acrylic** Binder
  - Good **adhesive** traits
  - 안정적 **유전체 강도**

```
1.2 Fiberglass Mesh

Adds mechanical stability

   Controls thickness
```

1. Performance Characteristics
  - 일관성 **열 저항**
  - Strong electrical barrier
  - 신뢰성 **적합성**

2. Typical Installations
  - Voltage regulators
  - Consumer PCB stacks
  - Compact power boards

This type of thermal pad works when engineers want predictable thickness and firm handling. In the world of **non-silicone thermal pad materials**, it’s the steady, no-drama option—clean processing, solid insulation, and dependable heat control.

## 3 Key Attributes of Non-Silicone Thermal Pads

Non-Silicone Thermal Pad materials are getting serious attention in electronics cooling. When heat rises, and space gets tight, you need smart thermal management. From thermal pad performance to insulation safety, here’s what really counts in a non-silicone thermal solution.

### Thermal Conductivity for Optimal Heat Dissipation

A **비실리콘 열 패드** works as a **열 인터페이스 재료** that pushes **heat flow** away from chips and into the **heat sink**. Its job sounds simple, yet the physics behind **열 전달** 그리고 **열 저항** can make or break device life.

1. Core thermal metrics
  1. **Thermal conductivity (W/mK)** defines how fast heat moves across the pad.
  2. Lower thermal resistance means less blockage between the processor and the cooler.
  3. A stable **temperature gradient** prevents hotspots and throttling.

2. Performance comparison snapshot

| 재료 유형 | Thermal Conductivity (W/mK) | 열 저항(°C-cm²/W) | Typical Thickness (mm) | Operating Temp (°C) |
| --- | --- | --- | --- | --- |
| 표준 실리콘 패드 | 3.0 | 0.45 | 1.0 | -40 to 180 |
| 비실리콘 열 패드 | 6.0 | 0.28 | 1.0 | -40 ~ 150 |
| High-End Non Silicone Pad | 8.5 | 0.20 | 0.5 | -40 ~ 150 |
| 열 그리스 | 4.0 | 0.35 | 0.1 | -50 ~ 200 |
| Phase Change Material | 5.5 | 0.30 | 0.2 | -20 to 130 |

1. System impact
  1. Lower junction temperature
  2. Better long-term **열 성능**
  3. Improved device reliability

A well-designed Non-Silicone Thermal Pad keeps processors cool without messy pump-out issues.

### Compressibility and Thickness for Gap Filling

Every PCB stack-up has tiny height differences. A **비실리콘 열 패드** acts as a smart **갭 필러**, adjusting through controlled **압축성** 그리고 **deflection**.

1. Mechanical adaptation
  1. 높음 **적합성** absorbs surface variation caused by **surface roughness**.
  2. 균형 잡힌 **elasticity** maintains steady contact under mounting **pressure**.
  3. Managed **bond line thickness** keeps heat paths short.

2. Structural balance
  - Too soft: excessive squeeze-out and unstable **규정 준수**.
  - Too hard: poor contact, rising interface resistance.

3. Application logic
  1. Measure gap distance.
  2. Select the correct thickness.
  3. Confirm compression ratio (often 20–40%).

This is where a thermal pad without silicone really shines. It fills space cleanly, avoids oil bleed, and protects delicate memory modules from stress.

### Dielectric Strength and Electrical Insulation

Heat control is only half the story. A Non-Silicone Thermal Pad must also prevent short circuits through strong **electrical isolation**.

1. Electrical protection layer
  1. 높음 **유전체 강도** resists **dielectric breakdown** under high **voltage**.
  2. Strong **insulation resistance** limits **leakage current**.
  3. A stable **dielectric constant** supports predictable behavior in compact layouts.

2. Safety performance
  1. Maintains spacing between conductive traces.
  2. Reduces the risk of arc faults.
  3. Meets safety expectations in telecom and medical hardware.

3. Material advantage
  - Non-conductive filler system
  - Silicone-free chemistry
  - Clean processing profile

In tight electronic assemblies, a non-silicone thermal pad isn’t just about cooling. It quietly guards circuits, keeping power and signal lines safely separated while heat keeps moving out.

## Non-Silicone Thermal Pad Vs. Silicone Alternatives

Thermal management is no small thing in today’s tight, high-power devices. From EV control units to LED modules, heat builds up fast. That’s why picking the right **비실리콘 열 패드** or silicone-based option matters. Let’s break down how Non-Silicone, Thermal Pad materials, and silicone elastomer pads really stack up.

### 비실리콘 열 패드

A **비실리콘 열 패드** is built for clean performance where contamination just isn’t acceptable. The idea sounds simple, but the material science behind a non-silicone thermal interface pad gets detailed.

- **Material Core Options**
  - **흑연**
    - High in-plane conductivity
    - Naturally low siloxane content

  - **Ceramic**
    - Strong **Electrical isolation**
    - Stable under pressure cycling

  - **Polymer** matrix blends
    - Enhanced **적합성**
    - Tuned with **Phase change material**

- **Performance Drivers**
  - **High thermal conductivity**
    - Moves heat fast from the IC to the heat sink

  - **낮은 가스 배출**
    - Protects optical lenses and sensors

  - Structural stability
    - Reduced pump-out risk compared to soft gels

- **Application Logic**
  - Automotive ECUs
  - Industrial power modules
  - Optical assemblies requiring contamination control

A well-designed **비실리콘 열 패드** keeps surfaces clean, especially in sealed systems. MarketsandMarkets noted in a 2025 thermal interface materials update:

> “Low-outgassing, non-silicone thermal interface solutions are gaining share in automotive electronics due to rising reliability standards.”

That shift is real. Sheen Technology develops **비실리콘 열 패드** solutions that balance **High thermal conductivity** with tight cleanliness specs, so your Thermal Pad choice doesn’t come back to haunt you.

### Silicone Alternative Pads

Silicone-based pads, usually built on **Silicone elastomer**, still dominate many designs.

- **Core Characteristics**
  - 와이드 **Thermal stability** range
  - 높음 **압축성**
  - Strong **유전체 강도**

- **머티리얼 구성**
  - Base elastomer
  - 전도성 **Filler particles**
  - Additives to manage softness

- **Operational Risks**
  - **Oil bleeding**
    - Can migrate onto PCB surfaces

  - **펌프 아웃 효과**
    - Under vibration or thermal cycling

  - Long-term drift in interface thickness

Silicone pads are flexible and easy to handle. For low-pressure assemblies, that flexibility helps a lot. Still, in high-reliability builds, engineers often compare them directly with a **비실리콘 열 패드** or other non-silicone thermal pad designs to avoid contamination issues.

In practice, the choice comes down to environment, lifetime goals, and cleanliness tolerance. Sheen Technology supports both paths, but when low outgassing and stability matter most, a carefully engineered **비실리콘 열 패드** usually wins the argument.

## Can Non-Silicone Pads Withstand High Temps?

When gear runs hot, the heat interface can make or break the system. A **비실리콘 열 패드** sounds simple, yet its real test comes under sustained load and rising temperatures. Let’s break down how a non-silicone thermal pad handles 200 °C, pressure, and long service life without falling apart.

### Operating Temperature Range to 200 °C

A **비실리콘 열 패드** built for 200 °C must balance **열 안정성** with real-world **내열성**. The trick isn’t just surviving peak heat; it’s staying reliable across cycles.

- **Material system design**
  - 폴리머 매트릭스
    - Controls **maximum operating temperature**
    - Slows **재료 성능 저하**

  - 세라믹 필러
    - Improve **high-temperature performance**
    - Enhance **thermal cycling** endurance

- **Temperature limit validation**
  - Continuous exposure testing
    - Confirms safe **temperature limits** at 180–200 °C

  - Intermittent overload checks
    - Measures recovery after spikes

- **Application match**
  - Power modules
  - Automotive heat sinks
  - Industrial drives

Sheen Technology engineers each Non-Silicone Thermal Pad to stay stable under repeated heating and cooling. That consistency keeps chips protected instead of cooking over time.

### Shore Hardness Stability Under Heat

Heat can soften weak pads. A solid thermal pad with a non-silicone formula keeps its durometer value steady, even after long heat exposure.

- **Mechanical stability control**
  - Base resin selection
    - Supports **material stiffness** retention

  - Filler distribution
    - Protects overall **물질적 무결성**

- **Thermal aging resistance**
  - Extended oven aging
    - Tracks **thermal aging** behavior

  - Compression testing
    - Limits **compression set**

- **Elastic response**
  - 유지 관리 **elasticity retention**
  - Prevents pump-out under vibration

The result? A Non-Silicone Thermal Pad that keeps pressure balanced across the interface. Sheen Technology focuses on this stability, so the pad doesn’t thin out or crack when the system gets seriously hot.

### Long-Term Thermal Impedance Performance

High heat is one thing. Holding low **열 저항** year after year is another story.

- **Initial interface quality**
  - Surface wet-out
    - Reduces **interface resistance**

  - Optimized thickness
    - 개선 **heat transfer efficiency**

- **Aging behavior**
  - Monitored **material aging effects**
    - Tracks shifts in **열 전도성**

  - Cyclic load simulation
    - Measures **성능 저하**

- **Sustained operation**
  - 안정적 **long-term reliability**
  - Consistent, **sustained thermal performance**

A well-designed Non-Silicone Thermal Pad keeps thermal impedance low instead of creeping upward with time. That means cooler processors, longer component life, and fewer surprise failures. For demanding electronics, Sheen Technology delivers non-silicone thermal pad solutions that stay cool even when everything else heats up.

## Scenario-Based: Automotive Electronics Cooling

Automotive electronics work hard and run hot. From **electronic control units** to power boards, heat builds up fast. Smart cooling with a **비실리콘 열 패드**, smart layout, and stable materials keeps cars running smoothly, even on long, hot drives.

### Power Transistors Heat Dissipation in ECUs

In modern **자동차 전자 제품**, **power transistors** inside **electronic control units** handle high switching loads. That means serious **열 방출** challenges.

1. Heat Flow Path Optimization 1.1 Source
  - 높음 **접합부 온도** forms at the transistor die.
  - Rising **열 저항** reduces efficiency.

```
1.2 Interface
   A Non-Silicone Thermal Pad bridges the gap to the heat sink.
   Stable **thermal conductivity ensures consistent transfer.
1.3 Sink
   Aluminum housing spreads heat outward.
```

- Why Non-Silicone Matters
- 2.1 Oil bleed risks drop to near zero.
- 2.2 Cleaner surfaces protect solder joints.
- 2.3 Long-term reliability improves under vibration.

A well-matched non-silicone thermal pad keeps the temperature curve steady. With the right thermal pad, ECU lifespan climbs, and failure rates shrink. Sheen Technology fine-tunes each **비실리콘 열 패드** for tight automotive specs, keeping performance steady mile after mile.

### Voltage Regulator Thermal Management

높음 **전력 밀도** makes **voltage regulators** sensitive to poor **열 전달**.

1. Core Thermal Control Logic 1.1 Heat Generation1.2 Interface Solution1.3 Stability Outcome
  - Conversion losses raise local temperature.

  - A **비실리콘 열 패드** acts as the primary **열 인터페이스 재료**.

  - 균형 잡힌 **temperature control** supports stable automotive power output.

2. Material Selection Focus 2.1 **Non-silicone materials** resist pump-out.2.2 Consistent compression lowers interface gaps.2.3 Electrical insulation protects PCB traces.

A silicone-free thermal pad keeps regulators cool without contamination risk. In compact layouts, that small detail makes a big difference.

### Gap Filler Solutions for Automotive Heat Sinks

Tolerance stack-up is real in **방열판** and PCB assemblies. Gaps vary. Surfaces aren’t perfect.

1. Gap Management Strategy 1.1 Mechanical Fit1.2 Thermal Path1.3 Reliability Layer
  - Custom die-cut **gap fillers** absorb height variation.

  - A **비실리콘 열 패드** boosts **heat transfer efficiency**.

  - Reduced stress improves **component reliability**.

2. Application Layers 2.1 Between MOSFETs and housing.2.2 Between regulators and aluminum frames.2.3 Across multi-device modules.

A high-quality non-silicone gap filler handles vibration, heat cycling, and pressure changes without drama. Sheen Technology supplies automotive-grade thermal interface options tailored for real-world **automotive cooling**, keeping systems cool, clean, and ready for the long haul.

## 비실리콘 열 패드에 대한 FAQ

### **What makes the Non-Silicone Thermal Pad suitable for sensitive electronics?**

In Automotive electronics, Telecommunications equipment, and Medical devices, contamination control is critical. A Non-Silicone Thermal Pad built on a **polymer matrix with ceramic fillers** 또는 **boron nitride** avoids siloxane migration near **integrated circuits** 그리고 **microprocessors**.

1. Maintains high **유전체 강도** for electrical insulation.  
2. Stable **작동 온도 범위** up to 200 °C.  
3. Controlled **열 임피던스** for steady heat dissipation.  
4. Supports junction temperature reduction in **power transistors** 그리고 **방열판**.

The result: cleaner assemblies and longer reliability improvement across printed circuit boards.

### **How do material choices affect thermal performance?**

Material composition shapes thermal management outcomes:  
1. **Polymer matrix + ceramic fillers** → balanced thermal conductivity and compressibility for gap filler use.  
2. **흑연** → high in-plane thermal conductivity, ideal for LED lighting modules.  
3. **Boron nitride elastomer** → electrical insulation with stress relief under cycling.  
4. **Acrylic with fiberglass reinforcement** → dimensional stability for consumer electronics.

Each option tunes thickness, Shore hardness, and heat dissipation based on interface needs.

### **[Where are Non-Silicone Thermal Pads most commonly applied?](https://www.sheenmaterials.com/ko/applications/auto/non-silicone-thermal-management/)**

Across industries, performance goals differ, but the interface challenge is similar—move heat, protect components.  
1. Power electronics → between power transistors and heat sinks.  
2. Automotive electronics → inside ECUs and industrial control systems.  
3. Consumer electronics → over memory chips and voltage regulators.  
4. LED lighting → sheet material lining aluminum housings.  
In every case, thermal management drives lifetime extension.

### **How can buyers verify quality before a bulk purchase?**

Serious suppliers provide transparent documentation:  
1. UL certification records;  
2. RoHS compliance and REACH compliance statements;  
3. Halogen-free declarations;  
4. Technical data sheet detailing thermal conductivity, thickness, and Shore hardness;  
5. Material safety data sheet for safe handling.  
Clear quality control builds trust before large-scale orders.

**What customization options are available for large projects?**

**[비실리콘 열 패드](https://www.sheenmaterials.com/ko/applications/auto/non-silicone-thermal-management/)** formats adapt to real assembly lines.

| Product Form | Interface Focus | Performance Objective |
| --- | --- | --- |
| Die-cut pads | Integrated circuits | Precise heat dissipation |
| 롤 재고 | Printed circuit boards | Flexible thickness control |
| 접착식 뒷면 | Heat sinks | Fast installation, stress relief |
| Custom geometries | Irregular enclosures | Reliable gap filler contact |

Tailored shapes and pre-cut designs reduce assembly time while keeping thermal conductivity and compressibility aligned with demanding applications.

### 댓글

태그[# 비실리콘 열 패드](https://www.sheenmaterials.com/ko/tag/non-silicone-thermal-pad/)

사랑을 나누세요 [https://www.facebook.com/sharer/sharer.php?u=https%3A%2F%2Fwww.sheenmaterials.com%2Fko%2Fnon-silicone-thermal-pad-applications%2F](https://www.facebook.com/sharer/sharer.php?u=https%3A%2F%2Fwww.sheenmaterials.com%2Fko%2Fnon-silicone-thermal-pad-applications%2F)
[https://twitter.com/intent/tweet?url=https%3A%2F%2Fwww.sheenmaterials.com%2Fko%2Fnon-silicone-thermal-pad-applications%2F&text=Expert%20Guide%20to%20Non-Silicone%20Thermal%20Pad%20Materials%20and%20Applications](https://twitter.com/intent/tweet?url=https%3A%2F%2Fwww.sheenmaterials.com%2Fko%2Fnon-silicone-thermal-pad-applications%2F&text=Expert%20Guide%20to%20Non-Silicone%20Thermal%20Pad%20Materials%20and%20Applications)
[#](#)
[https://www.linkedin.com/shareArticle?url=https%3A%2F%2Fwww.sheenmaterials.com%2Fko%2Fnon-silicone-thermal-pad-applications%2F&title=Expert%20Guide%20to%20Non-Silicone%20Thermal%20Pad%20Materials%20and%20Applications](https://www.linkedin.com/shareArticle?url=https%3A%2F%2Fwww.sheenmaterials.com%2Fko%2Fnon-silicone-thermal-pad-applications%2F&title=Expert%20Guide%20to%20Non-Silicone%20Thermal%20Pad%20Materials%20and%20Applications)

**제품 카테고리**

- [열 인터페이스 재료](https://www.sheenmaterials.com/ko/tim/)
- [질화 붕소 열 패드](https://www.sheenmaterials.com/ko/bn-thermal-pads/)
- [탄소 섬유 열 패드](https://www.sheenmaterials.com/ko/carbon-fiber-thermal-pads/)
- [세라믹화 가능 / 내화성 실리콘 폼](https://www.sheenmaterials.com/ko/ceramifiable-fire-barrier-silicone-foam/)
- [EMI 흡수 재료](https://www.sheenmaterials.com/ko/emi/)
- [그래핀 열 패드](https://www.sheenmaterials.com/ko/graphene-thermal-pads/)
- [저밀도](https://www.sheenmaterials.com/ko/low-density/)
- [비실리콘 열 전도성 패드](https://www.sheenmaterials.com/ko/non-silicone-thermal-conductive-pads/)
- [페이스트/액체](https://www.sheenmaterials.com/ko/paste-liquid/)
- [상변화 열 인터페이스 재료](https://www.sheenmaterials.com/ko/phase-change-thermal-interface-material/)
- [실리콘 폼](https://www.sheenmaterials.com/ko/silicone-foam/)
- [실리콘 열 전도성 패드](https://www.sheenmaterials.com/ko/silicone-thermal-conductive-pad/)
- [단일 성분 열 전도성 젤](https://www.sheenmaterials.com/ko/single-component-thermal-conductive-gel/)
- [표준 밀도](https://www.sheenmaterials.com/ko/standard-density/)
- [열 전도성 젤](https://www.sheenmaterials.com/ko/thermal-conductive-gel/)
- [열 전도성 실리콘 그리스](https://www.sheenmaterials.com/ko/thermal-conductive-silicone-grease/)
- [감열 필름](https://www.sheenmaterials.com/ko/thermal-film/)
- [열 패드](https://www.sheenmaterials.com/ko/thermal-pads/)
- [열 전도성 포팅 컴파운드](https://www.sheenmaterials.com/ko/thermally-conductive-potting-compound/)
- [2성분 열 전도성 젤](https://www.sheenmaterials.com/ko/two-component-thermal-conductive-gel/)

**연락처 정보**

### 관련 게시물

[https://www.sheenmaterials.com/ko/0-2-mm-ultra-thin-graphene-thermal-pad-with-thermal-resistance-as-low-as-0-052-c%c2%b7cm%c2%b2-w/](https://www.sheenmaterials.com/ko/0-2-mm-ultra-thin-graphene-thermal-pad-with-thermal-resistance-as-low-as-0-052-c%c2%b7cm%c2%b2-w/)
#### [0.2 mm Ultra-thin Graphene Thermal Pad with Thermal Resistance as Low as 0.052 °C·cm²/W](https://www.sheenmaterials.com/ko/0-2-mm-ultra-thin-graphene-thermal-pad-with-thermal-resistance-as-low-as-0-052-c%c2%b7cm%c2%b2-w/)

- 10월 13, 2026

[https://www.sheenmaterials.com/ko/nvidia-rubin-cooling-revolution/](https://www.sheenmaterials.com/ko/nvidia-rubin-cooling-revolution/)
#### [How NVIDIA Cools Rubin: 100% Liquid Cooling & Graphene TIMs](https://www.sheenmaterials.com/ko/nvidia-rubin-cooling-revolution/)

- 9월 23, 2026

[https://www.sheenmaterials.com/ko/high-elastic-recovery-graphene-thermal-pad/](https://www.sheenmaterials.com/ko/high-elastic-recovery-graphene-thermal-pad/)
#### [Why Compression Recovery Matters in AI Server Thermal Design](https://www.sheenmaterials.com/ko/high-elastic-recovery-graphene-thermal-pad/)

- 8월 26, 2026