{"id":3833,"date":"2026-08-13T09:10:18","date_gmt":"2026-08-13T09:10:18","guid":{"rendered":"https:\/\/www.sheenmaterials.com\/?page_id=3833"},"modified":"2026-08-18T06:32:08","modified_gmt":"2026-08-18T06:32:08","slug":"thermal-test-fixtures","status":"publish","type":"page","link":"https:\/\/www.sheenmaterials.com\/it\/applications\/thermal-test-fixtures\/","title":{"rendered":"Graphene Thermal Pads for Repeatable Thermal Test Fixtures"},"content":{"rendered":"\n<div class=\"gsbp-310e5fa9e7dca alignfull\">\n<div class=\"gsbp-7d3404e2ed22\">\n<div class=\"gsbp-12509a7459cdc\">\n<div class=\"gsbp-a330745c18e59\">\n<div class=\"gsbp-9c63461cfeab08\">\n<h1 class=\"gsbp-2c91cb8abe4c38\">Graphene Thermal Pads for Repeatable Thermal Test Fixtures<\/h1>\n\n\n\n<p class=\"gsbp-a756be0\">Sheen GSF75-03 and GSF90-03 graphene thermal pads can be evaluated as die-cut solid TIMs for automated thermal test fixtures. Controlled thickness and clean handling may reduce setup variation associated with grease dispensing. At the same time, actual thermal resistance and cycle life are qualified under your pressure, gap, heat load, and surface conditions.<\/p>\n<\/div>\n\n\n\n<div class=\"gsbp-3cf4ba34540c6\">\n<div class=\"gsbp-303378fd1e45b8\">\n<a class=\"gsbp-49654a9490aad\" href=\"https:\/\/www.sheenmaterials.com\/support\/\">Get Support<\/a>\n<\/div>\n<\/div>\n<\/div>\n\n\n\n<div class=\"gsbp-22ff8fd4aa8238\">\n<figure class=\"gsbp-0df34fa74af62\">\n<img decoding=\"async\" class=\"gsbp-74f807140889b8\" src=\"https:\/\/www.sheenmaterials.com\/wp-content\/uploads\/2026\/08\/Automated-thermal-test-fixture-Sheen-Materials-01.webp\" alt=\"INDUSTRIAL TESTING &amp; AUTOMATION\" width=\"760\" height=\"420\"\/>\n<\/figure>\n<\/div>\n<\/div>\n<\/div>\n\n\n\n<div class=\"gsbp-bd3c2b4f718298\"><\/div>\n<\/div>\n\n\n\n<!--\n  SHEEN MATERIALS - APPLICATION PAGE CONTENT\n  Page: Graphene Thermal Pads for Repeatable Thermal Test Fixtures\n\n  WordPress use:\n  1. Paste this entire file into a Custom HTML block or page template.\n  2. Do not add another site header or footer; WordPress supplies those globally.\n  3. Approved 4:3 WebP image URLs:\n     https:\/\/www.sheenmaterials.com\/wp-content\/uploads\/2026\/08\/automated-thermal-test-fixture.webp\n     https:\/\/www.sheenmaterials.com\/wp-content\/uploads\/2026\/08\/multi-station-test-environment.webp\n  4. Set the WordPress SEO title to:\n     Thermal Interface Solutions for Automated Test Fixtures | Sheen Materials\n  5. Suggested slug:\n     \/applications\/thermal-test-fixtures\/\n  6. This code intentionally excludes the page banner \/ H1 hero. Build the banner\n     separately in WordPress, following the existing Sheen application-page template.\n-->\n\n<style id=\"sheen-thermal-test-fixture-page-css\">\n  .smtf-page {\n    --smtf-navy: #0b3457;\n    --smtf-navy-2: #102a43;\n    --smtf-blue: #135c91;\n    --smtf-teal: #16a3b6;\n    --smtf-teal-dark: #087f8c;\n    --smtf-green: #16845b;\n    --smtf-ink: #172b3a;\n    --smtf-muted: #5d7180;\n    --smtf-line: #dce7ed;\n    --smtf-soft: #f3f8fa;\n    --smtf-soft-blue: #eef6fb;\n    --smtf-white: #ffffff;\n    --smtf-warning: #a66008;\n    --smtf-warning-bg: #fff8e9;\n    --smtf-radius: 22px;\n    --smtf-shadow: 0 18px 50px rgba(11, 52, 87, 0.10);\n    color: var(--smtf-ink);\n    background: var(--smtf-white);\n    font-family: inherit;\n    font-size: 17px;\n    line-height: 1.7;\n    overflow: hidden;\n  }\n\n  .smtf-page *,\n  .smtf-page *::before,\n  .smtf-page *::after {\n    box-sizing: border-box;\n  }\n\n  .smtf-page img,\n  .smtf-page svg {\n    display: block;\n    max-width: 100%;\n  }\n\n  .smtf-page a {\n    color: var(--smtf-blue);\n    text-underline-offset: 3px;\n  }\n\n  .smtf-page a:focus-visible,\n  .smtf-page summary:focus-visible {\n    outline: 3px solid rgba(22, 163, 182, 0.42);\n    outline-offset: 4px;\n    border-radius: 8px;\n  }\n\n  .smtf-container {\n    width: min(1180px, calc(100% - 40px));\n    margin-inline: auto;\n  }\n\n  .smtf-section {\n    padding: 92px 0;\n  }\n\n  .smtf-section--soft {\n    background: var(--smtf-soft);\n  }\n\n  .smtf-section--dark {\n    color: var(--smtf-white);\n    background:\n      radial-gradient(circle at 86% 18%, rgba(22, 163, 182, 0.24), transparent 28%),\n      linear-gradient(135deg, #092e4e 0%, #0b3457 62%, #0b425e 100%);\n  }\n\n  .smtf-eyebrow {\n    display: inline-flex;\n    align-items: center;\n    gap: 9px;\n    margin: 0 0 15px;\n    color: var(--smtf-teal-dark);\n    font-size: 0.78rem;\n    font-weight: 800;\n    letter-spacing: 0.12em;\n    line-height: 1.3;\n    text-transform: uppercase;\n  }\n\n  .smtf-eyebrow::before {\n    width: 28px;\n    height: 3px;\n    background: currentColor;\n    border-radius: 999px;\n    content: \"\";\n  }\n\n  .smtf-section--dark .smtf-eyebrow {\n    color: #62d5df;\n  }\n\n  .smtf-page h2,\n  .smtf-page h3 {\n    margin-top: 0;\n    color: var(--smtf-navy);\n    font-weight: 800;\n    line-height: 1.15;\n    letter-spacing: -0.025em;\n  }\n\n  .smtf-page h2 {\n    margin-bottom: 20px;\n    font-size: clamp(2rem, 3.5vw, 3.2rem);\n  }\n\n  .smtf-page h3 {\n    margin-bottom: 12px;\n    font-size: 1.3rem;\n  }\n\n  .smtf-section--dark h2,\n  .smtf-section--dark h3 {\n    color: var(--smtf-white);\n  }\n\n  .smtf-lead {\n    max-width: 760px;\n    margin: 0;\n    color: var(--smtf-muted);\n    font-size: 1.14rem;\n  }\n\n  .smtf-section--dark .smtf-lead {\n    color: #c9dce8;\n  }\n\n  .smtf-jump-nav {\n    position: relative;\n    z-index: 4;\n    border-bottom: 1px solid var(--smtf-line);\n    background: rgba(255,255,255,.97);\n  }\n\n  .smtf-jump-nav__inner {\n    display: flex;\n    gap: 8px;\n    overflow-x: auto;\n    padding: 12px 0;\n    scrollbar-width: thin;\n  }\n\n  .smtf-jump-nav a {\n    flex: 0 0 auto;\n    padding: 9px 13px;\n    border-radius: 9px;\n    color: var(--smtf-navy);\n    font-size: .86rem;\n    font-weight: 800;\n    text-decoration: none;\n  }\n\n  .smtf-jump-nav a:hover {\n    color: var(--smtf-teal-dark);\n    background: var(--smtf-soft);\n  }\n\n  .smtf-split {\n    display: grid;\n    grid-template-columns: minmax(0, 1fr) minmax(0, 1fr);\n    align-items: center;\n    gap: 64px;\n  }\n\n  .smtf-split > * {\n    min-width: 0;\n  }\n\n  .smtf-check-list,\n  .smtf-cross-list {\n    display: grid;\n    gap: 14px;\n    margin: 28px 0 0;\n    padding: 0;\n    list-style: none;\n  }\n\n  .smtf-check-list li,\n  .smtf-cross-list li {\n    position: relative;\n    padding-left: 34px;\n  }\n\n  .smtf-check-list li::before,\n  .smtf-cross-list li::before {\n    position: absolute;\n    top: .17em;\n    left: 0;\n    display: grid;\n    width: 23px;\n    height: 23px;\n    place-items: center;\n    border-radius: 50%;\n    color: var(--smtf-white);\n    font-size: .74rem;\n    font-weight: 900;\n  }\n\n  .smtf-check-list li::before {\n    background: var(--smtf-green);\n    content: \"\u2713\";\n  }\n\n  .smtf-cross-list li::before {\n    background: #9a5e16;\n    content: \"!\";\n  }\n\n  .smtf-figure {\n    width: 100%;\n    min-width: 0;\n    margin: 0;\n    overflow: hidden;\n    border: 1px solid var(--smtf-line);\n    border-radius: var(--smtf-radius);\n    background: #e9f0f3;\n    box-shadow: var(--smtf-shadow);\n  }\n\n  .smtf-figure img {\n    display: block;\n    width: 100% !important;\n    max-width: 100% !important;\n    height: auto !important;\n    aspect-ratio: 4 \/ 3;\n    object-fit: cover;\n  }\n\n  .smtf-figure figcaption {\n    padding: 15px 18px 18px;\n    color: var(--smtf-muted);\n    background: var(--smtf-white);\n    font-size: .82rem;\n    line-height: 1.55;\n  }\n\n  .smtf-card-grid {\n    display: grid;\n    grid-template-columns: repeat(3, minmax(0, 1fr));\n    gap: 20px;\n    margin-top: 42px;\n  }\n\n  .smtf-card {\n    padding: 28px;\n    border: 1px solid var(--smtf-line);\n    border-radius: 18px;\n    background: var(--smtf-white);\n    box-shadow: 0 12px 35px rgba(11, 52, 87, .06);\n  }\n\n  .smtf-card p:last-child {\n    margin-bottom: 0;\n  }\n\n  .smtf-card__icon {\n    display: grid;\n    width: 48px;\n    height: 48px;\n    margin-bottom: 18px;\n    place-items: center;\n    border-radius: 14px;\n    color: var(--smtf-navy);\n    background: #dff4f6;\n    font-size: 1.3rem;\n    font-weight: 900;\n  }\n\n  .smtf-scope-grid {\n    display: grid;\n    grid-template-columns: 1fr 1fr;\n    gap: 24px;\n    margin-top: 42px;\n  }\n\n  .smtf-scope-card {\n    padding: 34px;\n    border: 1px solid var(--smtf-line);\n    border-radius: var(--smtf-radius);\n    background: var(--smtf-white);\n  }\n\n  .smtf-scope-card--fit {\n    border-top: 5px solid var(--smtf-green);\n  }\n\n  .smtf-scope-card--check {\n    border-top: 5px solid var(--smtf-warning);\n  }\n\n  .smtf-control-grid {\n    display: grid;\n    grid-template-columns: repeat(4, minmax(0, 1fr));\n    gap: 17px;\n    margin-top: 42px;\n  }\n\n  .smtf-control {\n    min-height: 155px;\n    padding: 22px;\n    border: 1px solid rgba(255,255,255,.15);\n    border-radius: 17px;\n    background: rgba(255,255,255,.07);\n  }\n\n  .smtf-control strong {\n    display: block;\n    margin-bottom: 6px;\n    color: #78e0e7;\n    font-size: 1.05rem;\n  }\n\n  .smtf-control span {\n    color: #c9dce8;\n    font-size: .91rem;\n  }\n\n  .smtf-equation {\n    display: flex;\n    flex-wrap: wrap;\n    align-items: center;\n    justify-content: space-between;\n    gap: 18px;\n    margin-top: 30px;\n    padding: 21px 24px;\n    border: 1px solid rgba(255,255,255,.18);\n    border-radius: 15px;\n    background: rgba(0,0,0,.14);\n  }\n\n  .smtf-equation code {\n    color: #8ae8ed;\n    background: transparent;\n    font-family: ui-monospace, SFMono-Regular, Menlo, Consolas, monospace;\n    font-size: 1.08rem;\n    font-weight: 800;\n  }\n\n  .smtf-table-wrap {\n    margin-top: 38px;\n    overflow-x: auto;\n    border: 1px solid var(--smtf-line);\n    border-radius: 16px;\n    background: var(--smtf-white);\n    box-shadow: 0 12px 36px rgba(11, 52, 87, .06);\n  }\n\n  .smtf-table {\n    width: 100%;\n    min-width: 780px;\n    border-collapse: collapse;\n    font-size: .92rem;\n  }\n\n  .smtf-table th,\n  .smtf-table td {\n    padding: 16px 18px;\n    border-bottom: 1px solid var(--smtf-line);\n    text-align: left;\n    vertical-align: top;\n  }\n\n  .smtf-table th {\n    color: var(--smtf-white);\n    background: var(--smtf-navy);\n    font-size: .83rem;\n    letter-spacing: .02em;\n  }\n\n  .smtf-table tbody tr:nth-child(even) {\n    background: #f7fafb;\n  }\n\n  .smtf-table tbody tr:last-child td {\n    border-bottom: 0;\n  }\n\n  .smtf-table a {\n    font-weight: 800;\n  }\n\n  .smtf-note {\n    margin-top: 23px;\n    padding: 18px 20px;\n    border-left: 5px solid var(--smtf-teal);\n    border-radius: 0 12px 12px 0;\n    color: #3e5a68;\n    background: #ebf7f8;\n    font-size: .9rem;\n  }\n\n  .smtf-note--warning {\n    border-left-color: var(--smtf-warning);\n    color: #694a20;\n    background: var(--smtf-warning-bg);\n  }\n\n  .smtf-process {\n    display: grid;\n    grid-template-columns: repeat(4, minmax(0, 1fr));\n    gap: 18px;\n    margin-top: 44px;\n    counter-reset: smtf-step;\n  }\n\n  .smtf-process__step {\n    position: relative;\n    padding: 29px 24px 24px;\n    border: 1px solid var(--smtf-line);\n    border-radius: 18px;\n    background: var(--smtf-white);\n    counter-increment: smtf-step;\n  }\n\n  .smtf-process__step::before {\n    display: grid;\n    width: 42px;\n    height: 42px;\n    margin-bottom: 18px;\n    place-items: center;\n    border-radius: 12px;\n    color: var(--smtf-white);\n    background: var(--smtf-teal-dark);\n    font-weight: 900;\n    content: counter(smtf-step, decimal-leading-zero);\n  }\n\n  .smtf-process__step p {\n    margin-bottom: 0;\n    color: var(--smtf-muted);\n    font-size: .9rem;\n  }\n\n  .smtf-metric-grid {\n    display: grid;\n    grid-template-columns: repeat(4, minmax(0, 1fr));\n    gap: 17px;\n    margin-top: 40px;\n  }\n\n  .smtf-metric {\n    padding: 25px;\n    border: 1px dashed #8ca7b7;\n    border-radius: 16px;\n    background: var(--smtf-white);\n  }\n\n  .smtf-metric strong {\n    display: block;\n    color: var(--smtf-navy);\n    font-size: 1.1rem;\n  }\n\n  .smtf-metric span {\n    display: block;\n    margin-top: 7px;\n    color: var(--smtf-muted);\n    font-size: .87rem;\n  }\n\n  .smtf-status {\n    display: inline-flex;\n    align-items: center;\n    gap: 8px;\n    padding: 7px 11px;\n    border-radius: 999px;\n    color: #6c4715;\n    background: #fff0cc;\n    font-size: .77rem;\n    font-weight: 900;\n    letter-spacing: .04em;\n    text-transform: uppercase;\n  }\n\n  .smtf-status::before {\n    width: 8px;\n    height: 8px;\n    border-radius: 50%;\n    background: #d48616;\n    content: \"\";\n  }\n\n  .smtf-rollout-list {\n    display: grid;\n    gap: 12px;\n    margin: 25px 0 0;\n    padding: 0;\n    list-style: none;\n    counter-reset: rollout;\n  }\n\n  .smtf-rollout-list li {\n    display: grid;\n    grid-template-columns: 34px 1fr;\n    align-items: start;\n    gap: 12px;\n    counter-increment: rollout;\n  }\n\n  .smtf-rollout-list li::before {\n    display: grid;\n    width: 30px;\n    height: 30px;\n    place-items: center;\n    border-radius: 9px;\n    color: var(--smtf-white);\n    background: var(--smtf-teal-dark);\n    font-size: .78rem;\n    font-weight: 900;\n    content: counter(rollout);\n  }\n\n  .smtf-faq {\n    display: grid;\n    gap: 13px;\n    margin-top: 40px;\n  }\n\n  .smtf-faq details {\n    border: 1px solid var(--smtf-line);\n    border-radius: 14px;\n    background: var(--smtf-white);\n  }\n\n  .smtf-faq summary {\n    position: relative;\n    padding: 21px 58px 21px 22px;\n    color: var(--smtf-navy);\n    cursor: pointer;\n    font-weight: 800;\n    list-style: none;\n  }\n\n  .smtf-faq summary::-webkit-details-marker {\n    display: none;\n  }\n\n  .smtf-faq summary::after {\n    position: absolute;\n    top: 50%;\n    right: 21px;\n    display: grid;\n    width: 28px;\n    height: 28px;\n    place-items: center;\n    border-radius: 50%;\n    color: var(--smtf-teal-dark);\n    background: #e2f4f6;\n    font-size: 1.1rem;\n    transform: translateY(-50%);\n    content: \"+\";\n  }\n\n  .smtf-faq details[open] summary::after {\n    content: \"\u2212\";\n  }\n\n  .smtf-faq__answer {\n    padding: 0 22px 22px;\n    color: var(--smtf-muted);\n  }\n\n  .smtf-faq__answer p {\n    margin: 0;\n  }\n\n  .smtf-reference-line {\n    padding: 24px 0 30px;\n    color: var(--smtf-muted);\n    background: var(--smtf-soft);\n    font-size: .78rem;\n  }\n\n  .smtf-reference-line p {\n    margin: 0;\n  }\n\n  @media (max-width: 980px) {\n    .smtf-split {\n      grid-template-columns: 1fr;\n    }\n\n    .smtf-card-grid,\n    .smtf-control-grid,\n    .smtf-process,\n    .smtf-metric-grid {\n      grid-template-columns: repeat(2, minmax(0, 1fr));\n    }\n\n  }\n\n  @media (max-width: 680px) {\n    .smtf-page {\n      font-size: 16px;\n    }\n\n    .smtf-container {\n      width: min(100% - 28px, 1180px);\n    }\n\n    .smtf-section {\n      padding: 66px 0;\n    }\n\n    .smtf-card-grid,\n    .smtf-scope-grid,\n    .smtf-control-grid,\n    .smtf-process,\n    .smtf-metric-grid {\n      grid-template-columns: 1fr;\n    }\n\n    .smtf-card,\n    .smtf-scope-card {\n      padding: 24px;\n    }\n\n  }\n<\/style>\n\n<!-- Brand alignment layer based on the current Sheen Materials application-page system. -->\n<style id=\"sheen-thermal-test-fixture-brand-alignment-css\">\n  .smtf-page {\n    --smtf-navy: #0a5a40;\n    --smtf-navy-2: #084632;\n    --smtf-blue: #0a5a40;\n    --smtf-teal: #079366;\n    --smtf-teal-dark: #0a5a40;\n    --smtf-green: #0a5a40;\n    --smtf-ink: #22313a;\n    --smtf-muted: #667680;\n    --smtf-line: #dbe6df;\n    --smtf-soft: #eef7f2;\n    --smtf-soft-blue: #f8fbf9;\n    --smtf-orange: #ef7f1a;\n    --smtf-orange-dark: #df6d27;\n    --smtf-warm: #fffaf5;\n    --smtf-warning: #975214;\n    --smtf-warning-bg: #fff6ee;\n    --smtf-radius: 14px;\n    --smtf-shadow: 0 16px 34px rgba(16, 40, 30, .08);\n    color: var(--smtf-ink);\n    background: #fff;\n    font-family: Arial, Helvetica, sans-serif;\n    font-size: 16px;\n    line-height: 1.65;\n    overflow: visible;\n  }\n\n  .smtf-page a { color: var(--smtf-green); }\n\n  .smtf-page a:focus-visible,\n  .smtf-page summary:focus-visible {\n    outline-color: rgba(239, 127, 26, .48);\n  }\n\n  .smtf-container { width: min(1200px, calc(100% - 40px)); }\n\n  .smtf-section {\n    padding: 12px 0;\n    background: #fff;\n  }\n\n  .smtf-section > .smtf-container {\n    padding: 42px 38px;\n    border: 1px solid var(--smtf-line);\n    border-radius: 14px;\n    background: #fff;\n  }\n\n  .smtf-section--soft,\n  .smtf-section--dark {\n    color: var(--smtf-ink);\n    background: #fff;\n  }\n\n  .smtf-section--soft > .smtf-container,\n  .smtf-section--dark > .smtf-container {\n    background: var(--smtf-soft-blue);\n  }\n\n  .smtf-eyebrow,\n  .smtf-section--dark .smtf-eyebrow {\n    color: var(--smtf-green);\n    font-size: .75rem;\n    letter-spacing: .09em;\n  }\n\n  .smtf-eyebrow::before {\n    width: 24px;\n    height: 2px;\n  }\n\n  .smtf-page h2,\n  .smtf-page h3,\n  .smtf-section--dark h2,\n  .smtf-section--dark h3 {\n    color: #162129;\n    font-weight: 700;\n    letter-spacing: -.015em;\n  }\n\n  .smtf-page h2 {\n    margin-bottom: 10px;\n    font-size: clamp(1.8rem, 3vw, 2rem);\n    line-height: 1.2;\n  }\n\n  .smtf-page h3 {\n    font-size: 1.2rem;\n    line-height: 1.3;\n  }\n\n  .smtf-lead,\n  .smtf-section--dark .smtf-lead {\n    max-width: 980px;\n    color: var(--smtf-muted);\n    font-size: .95rem;\n    line-height: 1.85;\n  }\n\n  .smtf-jump-nav {\n    position: sticky;\n    top: 84px;\n    z-index: 30;\n    border: 0;\n    background: transparent;\n  }\n\n  .smtf-jump-nav__inner {\n    display: flex;\n    align-items: center;\n    flex-wrap: wrap;\n    gap: 12px 14px;\n    margin: 8px auto 22px;\n    padding: 18px 22px;\n    overflow: visible;\n    border: 1px solid #f0dfcf;\n    border-radius: 22px;\n    background: linear-gradient(180deg, #fffdfb 0%, #fff6ee 100%);\n    box-shadow: var(--smtf-shadow);\n  }\n\n  .smtf-jump-nav a {\n    min-height: 46px;\n    display: inline-flex;\n    align-items: center;\n    justify-content: center;\n    padding: 10px 20px;\n    border: 1px solid #efc49f;\n    border-radius: 999px;\n    color: #975214;\n    background: var(--smtf-warm);\n    font-size: .84rem;\n    box-shadow: 0 5px 12px rgba(239, 127, 26, .08);\n  }\n\n  .smtf-jump-nav a:hover,\n  .smtf-jump-nav a:focus-visible,\n  .smtf-jump-nav a.is-active:not(.smtf-jump-nav__cta) {\n    color: #fff;\n    border-color: var(--smtf-orange);\n    background: linear-gradient(135deg, #f39a3a 0%, var(--smtf-orange) 100%);\n    box-shadow: 0 10px 20px rgba(239, 127, 26, .18);\n  }\n\n  .smtf-jump-nav .smtf-jump-nav__cta {\n    margin-left: auto;\n    color: #fff;\n    border-color: var(--smtf-orange);\n    background: linear-gradient(135deg, #f39a3a 0%, var(--smtf-orange) 100%);\n    box-shadow: 0 12px 24px rgba(239, 127, 26, .2);\n  }\n\n  .smtf-split { gap: 48px; }\n\n  .smtf-figure {\n    border-radius: 12px;\n    background: #fff;\n    box-shadow: none;\n  }\n\n  .smtf-figure figcaption {\n    border-top: 1px solid var(--smtf-line);\n    background: #fbfdfc;\n  }\n\n  .smtf-card-grid,\n  .smtf-scope-grid,\n  .smtf-control-grid,\n  .smtf-process,\n  .smtf-metric-grid { gap: 14px; }\n\n  .smtf-card,\n  .smtf-scope-card,\n  .smtf-control,\n  .smtf-process__step,\n  .smtf-metric,\n  .smtf-faq details {\n    border-color: var(--smtf-line);\n    border-radius: 12px;\n    background: #fff;\n    box-shadow: none;\n  }\n\n  .smtf-card { padding: 24px; }\n\n  .smtf-card__icon {\n    width: auto;\n    min-width: 46px;\n    padding: 0 12px;\n    border-radius: 999px;\n    color: var(--smtf-green);\n    background: var(--smtf-soft);\n    font-size: .95rem;\n  }\n\n  .smtf-scope-card--fit { border-top-color: var(--smtf-green); }\n  .smtf-scope-card--check { border-top-color: var(--smtf-orange); }\n  .smtf-cross-list li::before { background: var(--smtf-orange); }\n\n  .smtf-control {\n    min-height: 150px;\n    border: 1px solid var(--smtf-line);\n  }\n\n  .smtf-control strong { color: var(--smtf-green); }\n  .smtf-control span { color: var(--smtf-muted); }\n\n  .smtf-equation {\n    border-color: var(--smtf-green);\n    color: rgba(255, 255, 255, .92);\n    background: linear-gradient(135deg, var(--smtf-green) 0%, var(--smtf-navy-2) 100%);\n  }\n\n  .smtf-equation code { color: #fff; }\n\n  .smtf-table-wrap {\n    border-radius: 12px;\n    box-shadow: none;\n  }\n\n  .smtf-table th { background: var(--smtf-green); }\n  .smtf-table tbody tr:nth-child(even) { background: #f9fcfb; }\n\n  .smtf-note {\n    border-left-color: var(--smtf-green);\n    color: #42535e;\n    background: var(--smtf-soft);\n  }\n\n  .smtf-note--warning {\n    border-left-color: var(--smtf-orange);\n    color: #694a20;\n    background: var(--smtf-warning-bg);\n  }\n\n  .smtf-process__step::before,\n  .smtf-rollout-list li::before { background: var(--smtf-green); }\n\n  .smtf-metric { border-style: solid; }\n\n  .smtf-metric strong,\n  .smtf-faq summary { color: #162129; }\n\n  .smtf-faq summary::after {\n    color: var(--smtf-green);\n    background: var(--smtf-soft);\n  }\n\n  .smtf-status {\n    color: #975214;\n    background: #fff1e4;\n  }\n\n  .smtf-status::before { background: var(--smtf-orange); }\n\n  .smtf-brand-divider {\n    width: min(1200px, calc(100% - 40px));\n    margin: 12px auto;\n    padding: 10px 18px;\n    border-radius: 10px;\n    color: rgba(255, 255, 255, .92);\n    background: var(--smtf-green);\n    font-size: .75rem;\n    font-weight: 700;\n    letter-spacing: .035em;\n    text-align: center;\n  }\n\n  .smtf-brand-divider span + span::before {\n    margin: 0 10px;\n    color: #f39a3a;\n    content: \"\u00b7\";\n  }\n\n  .smtf-reference-line {\n    margin-top: 12px;\n    color: var(--smtf-muted);\n    background: var(--smtf-soft-blue);\n  }\n\n  @media (max-width: 1100px) {\n    .smtf-jump-nav {\n      position: relative;\n      top: auto;\n    }\n\n    .smtf-jump-nav .smtf-jump-nav__cta { margin-left: 0; }\n  }\n\n  @media (max-width: 680px) {\n    .smtf-container,\n    .smtf-brand-divider { width: min(100% - 28px, 1200px); }\n\n    .smtf-section { padding: 8px 0; }\n\n    .smtf-section > .smtf-container { padding: 30px 22px; }\n\n    .smtf-jump-nav__inner {\n      gap: 9px;\n      padding: 16px;\n      border-radius: 16px;\n    }\n\n    .smtf-jump-nav a,\n    .smtf-jump-nav .smtf-jump-nav__cta { width: 100%; }\n\n  }\n<\/style>\n\n<main class=\"smtf-page\" id=\"smtf-top\" aria-label=\"Graphene thermal pad solution for automated thermal test fixtures\">\n  <nav class=\"smtf-jump-nav\" aria-label=\"On this page\">\n    <div class=\"smtf-container smtf-jump-nav__inner\">\n      <a href=\"#smtf-variability\" class=\"is-active\">Overview<\/a>\n      <a href=\"#smtf-fit\">Applications<\/a>\n      <a href=\"#smtf-controls\">Test Method<\/a>\n      <a href=\"#smtf-products\">Specifications<\/a>\n      <a href=\"#smtf-comparison\">Validation<\/a>\n      <a href=\"#smtf-qualification\">Qualification<\/a>\n      <a class=\"smtf-jump-nav__cta\" href=\"https:\/\/www.sheenmaterials.com\/online-inquiry\/\">Get Support<\/a>\n    <\/div>\n  <\/nav>\n\n  <section class=\"smtf-section\" id=\"smtf-variability\" aria-labelledby=\"smtf-variability-title\">\n    <div class=\"smtf-container smtf-split\">\n      <div>\n        <p class=\"smtf-eyebrow\">Why the interface matters<\/p>\n        <h2 id=\"smtf-variability-title\">A repeatable test begins with a controlled interface<\/h2>\n        <p class=\"smtf-lead\">\n          Thermal grease can perform very well, but its bond-line thickness and coverage may\n          change with dispensing volume, spreading method, surface condition and operator handling.\n          In a production test fixture, those variables can become part of the measurement.\n        <\/p>\n        <ul class=\"smtf-check-list\">\n          <li><strong>Controlled geometry:<\/strong> pre-cut thickness and footprint reduce dispensing variation.<\/li>\n          <li><strong>Cleaner changeovers:<\/strong> a solid interface can reduce residue on the fixture and test sample.<\/li>\n          <li><strong>Defined process:<\/strong> installation orientation, compression and replacement criteria can be standardized.<\/li>\n          <li><strong>Measurable qualification:<\/strong> repeatability, cycle drift and station correlation can be compared with the current grease process.<\/li>\n        <\/ul>\n        <div class=\"smtf-note smtf-note--warning\">\n          A graphene pad is not automatically more accurate or lower in thermal resistance than grease.\n          The benefit must be demonstrated under the fixture&#8217;s real gap, pressure, heat load and surface conditions.\n        <\/div>\n      <\/div>\n\n      <figure class=\"smtf-figure\">\n        <img\n          src=\"https:\/\/www.sheenmaterials.com\/wp-content\/uploads\/2026\/08\/automated-thermal-test-fixture.webp?v=20260814\"\n          width=\"1200\"\n          height=\"900\"\n          loading=\"eager\"\n          fetchpriority=\"high\"\n          decoding=\"async\"\n          alt=\"Automated thermal test fixture with clamping plate and liquid-cooling manifold\">\n        <figcaption>\n          Example thermal test fixture environment. TIM thickness and compression must be\n          validated for each setup. Customer application image used with permission.\n        <\/figcaption>\n      <\/figure>\n    <\/div>\n  <\/section>\n\n  <section class=\"smtf-section smtf-section--soft\" id=\"smtf-fit\" aria-labelledby=\"smtf-fit-title\">\n    <div class=\"smtf-container\">\n      <p class=\"smtf-eyebrow\">Application boundaries<\/p>\n      <h2 id=\"smtf-fit-title\">Where a solid graphene TIM is worth evaluating<\/h2>\n      <p class=\"smtf-lead\">\n        This solution is intended for fixtures that measure heat-transfer performance. It does\n        not claim to improve fan airflow, motor electrical performance, noise or dynamic balance.\n      <\/p>\n\n      <div class=\"smtf-card-grid\" aria-label=\"Relevant test applications\">\n        <article class=\"smtf-card\">\n          <div class=\"smtf-card__icon\" aria-hidden=\"true\">R\u03b8<\/div>\n          <h3>Cooling Module Testing<\/h3>\n          <p>Thermal resistance and thermal performance testing for heat sinks, heat pipes, vapor chambers and assembled cooling modules.<\/p>\n        <\/article>\n        <article class=\"smtf-card\">\n          <div class=\"smtf-card__icon\" aria-hidden=\"true\">H\u2082O<\/div>\n          <h3>Liquid-Cooling Testing<\/h3>\n          <p>Cold plates, water blocks and liquid loops where interface pressure, inlet temperature and flow are controlled.<\/p>\n        <\/article>\n        <article class=\"smtf-card\">\n          <div class=\"smtf-card__icon\" aria-hidden=\"true\">ATE<\/div>\n          <h3>Semiconductor Thermal Fixtures<\/h3>\n          <p>Thermal characterization, burn-in or automated fixtures that require a defined interface between a heat source and cooling structure.<\/p>\n        <\/article>\n      <\/div>\n\n      <div class=\"smtf-scope-grid\">\n        <article class=\"smtf-scope-card smtf-scope-card--fit\">\n          <h3>Good candidate conditions<\/h3>\n          <ul class=\"smtf-check-list\">\n            <li>Frequent fixture loading, unloading or line changeover<\/li>\n            <li>Controlled clamping force or assembly torque<\/li>\n            <li>A defined interface gap that matches an available pad thickness<\/li>\n            <li>Residue and cleaning time affect test-station availability<\/li>\n            <li>Repeatability is more valuable than the lowest material unit price<\/li>\n          <\/ul>\n        <\/article>\n\n        <article class=\"smtf-scope-card smtf-scope-card--check\">\n          <h3>Validate carefully before use<\/h3>\n          <ul class=\"smtf-cross-list\">\n            <li>Electrical insulation is required at an exposed, powered interface<\/li>\n            <li>The existing grease uses an ultra-thin bond line on very flat surfaces<\/li>\n            <li>Clamping pressure is low, uncontrolled or uneven<\/li>\n            <li>Historical test limits must remain directly comparable without correlation<\/li>\n            <li>The gap, surface roughness or motion can damage the pad during cycling<\/li>\n          <\/ul>\n        <\/article>\n      <\/div>\n    <\/div>\n  <\/section>\n\n  <div class=\"smtf-brand-divider\" aria-label=\"Sheen Materials values\">\n    <span>Integrity<\/span><span>Professionalism<\/span><span>Win-Win<\/span><span>User-Oriented Sheen<\/span>\n  <\/div>\n\n  <section class=\"smtf-section smtf-section--dark\" id=\"smtf-controls\" aria-labelledby=\"smtf-controls-title\">\n    <div class=\"smtf-container\">\n      <p class=\"smtf-eyebrow\">Measurement discipline<\/p>\n      <h2 id=\"smtf-controls-title\">Thermal conductivity alone does not predict fixture performance<\/h2>\n      <p class=\"smtf-lead\">\n        The measured system result includes the pad&#8217;s bulk resistance and both contact interfaces.\n        Pressure, bond-line thickness and surface condition must therefore be reported with every comparison.\n      <\/p>\n\n      <div class=\"smtf-control-grid\" aria-label=\"Controlled test variables\">\n        <div class=\"smtf-control\"><strong>Mechanical<\/strong><span>Clamping pressure, torque, compression, parallelism and fixture-to-fixture variation.<\/span><\/div>\n        <div class=\"smtf-control\"><strong>Thermal<\/strong><span>Input power, heat flux, hot-side temperature, inlet temperature and steady-state criteria.<\/span><\/div>\n        <div class=\"smtf-control\"><strong>Hydraulic<\/strong><span>Coolant type, flow rate, pressure drop and inlet\/outlet temperature where liquid cooling is used.<\/span><\/div>\n        <div class=\"smtf-control\"><strong>Interface<\/strong><span>Contact area, pad thickness, surface flatness, roughness, cleanliness and installation orientation.<\/span><\/div>\n      <\/div>\n\n      <div class=\"smtf-equation\">\n        <span>Report the complete fixture result:<\/span>\n        <code>R\u03b8 = (T<sub>hot<\/sub> \u2212 T<sub>cold<\/sub>) \/ Q<\/code>\n        <span>and the test conditions used to obtain it.<\/span>\n      <\/div>\n    <\/div>\n  <\/section>\n\n  <section class=\"smtf-section\" id=\"smtf-products\" aria-labelledby=\"smtf-products-title\">\n    <div class=\"smtf-container\">\n      <p class=\"smtf-eyebrow\">Published material options<\/p>\n      <h2 id=\"smtf-products-title\">Start with the interface requirement\u2014not the highest W\/m\u00b7K number<\/h2>\n      <p class=\"smtf-lead\">\n        GSF75-03 and GSF90-03 are soft, vertically oriented graphene thermal pad candidates.\n        Select the thinnest practical configuration that fills the real interface and maintains\n        stable contact under the available fixture pressure.\n      <\/p>\n\n      <div class=\"smtf-table-wrap\" role=\"region\" aria-label=\"Graphene thermal pad specifications\" tabindex=\"0\">\n        <table class=\"smtf-table\">\n          <thead>\n            <tr>\n              <th scope=\"col\">Model<\/th>\n              <th scope=\"col\">Thermal Conductivity<\/th>\n              <th scope=\"col\">Thermal Resistance<\/th>\n              <th scope=\"col\">Thickness Range<\/th>\n              <th scope=\"col\">Operating Temperature<\/th>\n              <th scope=\"col\">Rebound<\/th>\n            <\/tr>\n          <\/thead>\n          <tbody>\n            <tr>\n              <td><a href=\"https:\/\/www.sheenmaterials.com\/graphene-thermal-pad-gsf75-03\/\">GSF75-03<\/a><\/td>\n              <td>75 W\/m\u00b7K<br><small>ASTM E1461, published value<\/small><\/td>\n              <td>\u22640.12 \u00b0C\u00b7cm\u00b2\/W @40 psi<br><small>ASTM D5470<\/small><\/td>\n              <td>0.3\u20132.0 mm<\/td>\n              <td>\u221240 to 150\u00b0C<\/td>\n              <td>\u226590%<\/td>\n            <\/tr>\n            <tr>\n              <td><a href=\"https:\/\/www.sheenmaterials.com\/graphene-thermal-pad-gsf90-03\/\">GSF90-03<\/a><\/td>\n              <td>90 W\/m\u00b7K<br><small>ASTM E1461, published value<\/small><\/td>\n              <td>\u22640.10 \u00b0C\u00b7cm\u00b2\/W @40 psi<br><small>ASTM D5470<\/small><\/td>\n              <td>0.3\u20132.0 mm<\/td>\n              <td>\u221240 to 150\u00b0C<\/td>\n              <td>\u226590%<\/td>\n            <\/tr>\n          <\/tbody>\n        <\/table>\n      <\/div>\n\n      <div class=\"smtf-note\">\n        These are published material specifications, not guaranteed fixture results. ASTM E1461 is\n        a flash diffusivity method; refer to the current TDS for the property calculation and test details.\n        Actual system thermal resistance depends on the full interface stack and operating conditions.\n      <\/div>\n\n      <div class=\"smtf-note smtf-note--warning\">\n        Electrical safety: the current public GSF75-03 and GSF90-03 specifications do not state a\n        dielectric strength or volume resistivity. If electrical isolation is required, request an\n        insulating construction or evaluate another qualified TIM before powered testing.\n      <\/div>\n    <\/div>\n  <\/section>\n\n  <section class=\"smtf-section smtf-section--soft\" id=\"smtf-comparison\" aria-labelledby=\"smtf-comparison-title\">\n    <div class=\"smtf-container\">\n      <p class=\"smtf-eyebrow\">A fair comparison<\/p>\n      <h2 id=\"smtf-comparison-title\">Compare the real grease process with the real pad configuration<\/h2>\n      <p class=\"smtf-lead\">\n        A generic conductivity comparison is not enough. The evaluation should use the customer&#8217;s\n        current grease, dispensing process and acceptance limits as the baseline.\n      <\/p>\n\n      <div class=\"smtf-table-wrap\" role=\"region\" aria-label=\"Grease and graphene pad evaluation matrix\" tabindex=\"0\">\n        <table class=\"smtf-table\">\n          <thead>\n            <tr>\n              <th scope=\"col\">Evaluation Item<\/th>\n              <th scope=\"col\">Current Grease Baseline<\/th>\n              <th scope=\"col\">Graphene Pad Candidate<\/th>\n              <th scope=\"col\">Evidence Required<\/th>\n            <\/tr>\n          <\/thead>\n          <tbody>\n            <tr>\n              <td>Bond-line control<\/td>\n              <td>Depends on dose, spreading and assembly pressure<\/td>\n              <td>Predefined nominal thickness; compression still matters<\/td>\n              <td>Loaded thickness and pressure record<\/td>\n            <\/tr>\n            <tr>\n              <td>Thermal performance<\/td>\n              <td>Can be excellent with a thin, well-controlled bond line<\/td>\n              <td>Must overcome greater pad thickness and both contacts<\/td>\n              <td>Fixture R\u03b8 under identical conditions<\/td>\n            <\/tr>\n            <tr>\n              <td>Preparation and cleaning<\/td>\n              <td>Dispense, spread and clean according to the current SOP<\/td>\n              <td>Die-cut placement and defined removal procedure<\/td>\n              <td>Changeover time and residue inspection<\/td>\n            <\/tr>\n            <tr>\n              <td>Repeatability<\/td>\n              <td>Measure operator and station variation<\/td>\n              <td>Measure installation and compression variation<\/td>\n              <td>Standard deviation, CV and GR&amp;R<\/td>\n            <\/tr>\n            <tr>\n              <td>Reuse \/ cycle life<\/td>\n              <td>Normally reapplied after disassembly<\/td>\n              <td>Possible only after cycle-life qualification<\/td>\n              <td>Drift, damage and replacement criteria<\/td>\n            <\/tr>\n            <tr>\n              <td>Electrical isolation<\/td>\n              <td>Verify the exact grease specification<\/td>\n              <td>Do not assume the graphene pad is insulating<\/td>\n              <td>Dielectric data and powered-fixture risk review<\/td>\n            <\/tr>\n            <tr>\n              <td>Total cost per valid test<\/td>\n              <td>Material, dispensing, cleaning, downtime and retest cost<\/td>\n              <td>Pad, die cutting, replacement, downtime and retest cost<\/td>\n              <td>Recorded test-station operating data<\/td>\n            <\/tr>\n          <\/tbody>\n        <\/table>\n      <\/div>\n    <\/div>\n  <\/section>\n\n  <section class=\"smtf-section\" id=\"smtf-qualification\" aria-labelledby=\"smtf-qualification-title\">\n    <div class=\"smtf-container\">\n      <p class=\"smtf-eyebrow\">Qualification and rollout<\/p>\n      <h2 id=\"smtf-qualification-title\">A four-stage path from sample to multi-station deployment<\/h2>\n      <p class=\"smtf-lead\">\n        The goal is not to force a material substitution. It is to determine whether a controlled\n        solid TIM improves the measurement process without compromising thermal performance,\n        safety or correlation with historical data.\n      <\/p>\n\n      <div class=\"smtf-process\">\n        <article class=\"smtf-process__step\">\n          <h3>Define the fixture<\/h3>\n          <p>Collect contact size, gap, pressure, power, surface material, temperature, current TIM and cycle target.<\/p>\n        <\/article>\n        <article class=\"smtf-process__step\">\n          <h3>Screen the materials<\/h3>\n          <p>Select GSF75-03 or GSF90-03 and the thinnest practical thickness. Verify fit, handling and electrical risk.<\/p>\n        <\/article>\n        <article class=\"smtf-process__step\">\n          <h3>Run the A\/B study<\/h3>\n          <p>Compare the current grease process and pad under identical fixture conditions, operators and stations.<\/p>\n        <\/article>\n        <article class=\"smtf-process__step\">\n          <h3>Lock the process<\/h3>\n          <p>Define die-cut drawing, orientation, compression window, inspection, replacement limit and batch traceability.<\/p>\n        <\/article>\n      <\/div>\n\n      <div class=\"smtf-table-wrap\" role=\"region\" aria-label=\"Suggested qualification test matrix\" tabindex=\"0\">\n        <table class=\"smtf-table\">\n          <thead>\n            <tr>\n              <th scope=\"col\">Study<\/th>\n              <th scope=\"col\">Suggested Design<\/th>\n              <th scope=\"col\">Record<\/th>\n            <\/tr>\n          <\/thead>\n          <tbody>\n            <tr>\n              <td>Installation repeatability<\/td>\n              <td>At least 10 installations per condition; include multiple operators where manual handling remains<\/td>\n              <td>Mean R\u03b8, standard deviation, CV, placement observations<\/td>\n            <\/tr>\n            <tr>\n              <td>Station correlation<\/td>\n              <td>Repeat on three stations where practical using the same control sample and SOP<\/td>\n              <td>Bias, station-to-station spread, calibration status<\/td>\n            <\/tr>\n            <tr>\n              <td>Reuse and cycle drift<\/td>\n              <td>Inspect at cycle 0, 50, 100 and the intended service limit, such as 500 cycles<\/td>\n              <td>R\u03b8 drift, thickness, cracking, contamination and replacement trigger<\/td>\n            <\/tr>\n            <tr>\n              <td>Operational impact<\/td>\n              <td>Time grease preparation\/cleaning and pad placement\/removal under the same workflow<\/td>\n              <td>Changeover time, downtime, residue, retest and total cost per valid test<\/td>\n            <\/tr>\n          <\/tbody>\n        <\/table>\n      <\/div>\n\n      <div style=\"margin-top:42px\">\n        <span class=\"smtf-status\">Qualification required before publishing results<\/span>\n      <\/div>\n      <div class=\"smtf-metric-grid\" aria-label=\"Result metrics to be published after validation\">\n        <div class=\"smtf-metric\"><strong>Mean Fixture R\u03b8<\/strong><span>Pad vs. current grease under identical conditions<\/span><\/div>\n        <div class=\"smtf-metric\"><strong>Repeatability CV<\/strong><span>Distribution across repeated installations<\/span><\/div>\n        <div class=\"smtf-metric\"><strong>Measurement GR&amp;R<\/strong><span>Operator, station and repeatability contribution<\/span><\/div>\n        <div class=\"smtf-metric\"><strong>Cycle Drift<\/strong><span>Change in R\u03b8 and physical condition over service life<\/span><\/div>\n      <\/div>\n    <\/div>\n  <\/section>\n\n  <section class=\"smtf-section smtf-section--soft\" aria-labelledby=\"smtf-rollout-title\">\n    <div class=\"smtf-container smtf-split\">\n      <figure class=\"smtf-figure\">\n        <img\n          src=\"https:\/\/www.sheenmaterials.com\/wp-content\/uploads\/2026\/08\/multi-station-test-environment.webp?v=20260814\"\n          width=\"1200\"\n          height=\"900\"\n          loading=\"lazy\"\n          decoding=\"async\"\n          alt=\"Multi-station automated test environment for fans motors and cooling modules\">\n        <figcaption>\n          Automated multi-station test environment. Faces, screens and identifying details should\n          be obscured before publication. Customer application image used with permission.\n        <\/figcaption>\n      <\/figure>\n\n      <div>\n        <p class=\"smtf-eyebrow\">Production-scale support<\/p>\n        <h2 id=\"smtf-rollout-title\">From one qualified fixture to controlled multi-station supply<\/h2>\n        <p class=\"smtf-lead\">\n          After the interface is qualified, Sheen can convert the approved material and geometry\n          into a controlled consumable specification for repeatable supply.\n        <\/p>\n        <ol class=\"smtf-rollout-list\">\n          <li><span><strong>Freeze the drawing:<\/strong> contact footprint, cutouts, orientation, thickness and tolerances.<\/span><\/li>\n          <li><span><strong>Define handling:<\/strong> liner, optional single-side positioning aid, cleanliness and installation SOP.<\/span><\/li>\n          <li><span><strong>Define replacement:<\/strong> cycle count, visual defects, thickness or R\u03b8 drift limits.<\/span><\/li>\n          <li><span><strong>Control supply:<\/strong> approved TDS, incoming inspection, lot traceability and change notification.<\/span><\/li>\n        <\/ol>\n      <\/div>\n    <\/div>\n  <\/section>\n\n  <section class=\"smtf-section\" id=\"smtf-faq\" aria-labelledby=\"smtf-faq-title\">\n    <div class=\"smtf-container\">\n      <p class=\"smtf-eyebrow\">Engineering FAQ<\/p>\n      <h2 id=\"smtf-faq-title\">Questions to resolve before changing the test interface<\/h2>\n\n      <div class=\"smtf-faq\">\n        <details>\n          <summary>Can a graphene thermal pad always replace thermal grease?<\/summary>\n          <div class=\"smtf-faq__answer\"><p>No. Grease can achieve an extremely thin bond line on flat, well-clamped surfaces. A graphene pad should be treated as a candidate solid TIM and compared through fixture-level thermal resistance, repeatability, handling and safety testing.<\/p><\/div>\n        <\/details>\n        <details>\n          <summary>Does a higher thermal conductivity guarantee a lower test temperature?<\/summary>\n          <div class=\"smtf-faq__answer\"><p>No. Total performance also depends on material thickness, contact resistance, pressure, surface flatness and heat flux. Compare the complete interface thermal resistance under the real fixture conditions.<\/p><\/div>\n        <\/details>\n        <details>\n          <summary>Can the same pad be reused for multiple test cycles?<\/summary>\n          <div class=\"smtf-faq__answer\"><p>Potentially, but no universal cycle count should be assumed. Establish a replacement limit by measuring thermal drift and checking compression, cracks, contamination, edge damage and handling marks over the intended service life.<\/p><\/div>\n        <\/details>\n        <details>\n          <summary>Are GSF75-03 and GSF90-03 electrically insulating?<\/summary>\n          <div class=\"smtf-faq__answer\"><p>Do not assume electrical insulation. The current public product specifications do not publish dielectric strength or volume resistivity. If the interface can contact powered conductors, request an insulating construction or another qualified TIM.<\/p><\/div>\n        <\/details>\n        <details>\n          <summary>What information does Sheen need to prepare an A\/B test kit?<\/summary>\n          <div class=\"smtf-faq__answer\"><p>Provide the contact drawing and area, nominal and maximum gap, clamping pressure or torque, surface materials, input power, operating temperature, current grease model and bond-line process, electrical isolation requirement and target cycle count.<\/p><\/div>\n        <\/details>\n        <details>\n          <summary>Will changing the TIM affect historical test limits?<\/summary>\n          <div class=\"smtf-faq__answer\"><p>It may. The TIM is part of the measurement system. Run a correlation study against the existing method, document any systematic bias and complete change control before applying the new interface to production acceptance testing.<\/p><\/div>\n        <\/details>\n      <\/div>\n    <\/div>\n  <\/section>\n\n  <div class=\"smtf-reference-line\">\n    <div class=\"smtf-container\">\n      <p>\n        Engineering references: ASTM D5470 for steady-state thermal impedance methodology;\n        current Sheen GSF75-03 and GSF90-03 product data. Product suitability and process\n        compatibility must be verified before production use.\n      <\/p>\n    <\/div>\n  <\/div>\n<\/main>\n\n<script>\n  (function () {\n    var root = document.getElementById('smtf-top');\n    if (!root) return;\n\n    var nav = root.querySelector('.smtf-jump-nav');\n    if (!nav) return;\n\n    var links = Array.prototype.slice.call(nav.querySelectorAll('a[href^=\"#\"]'));\n    var sections = links.map(function (link) {\n      return root.querySelector(link.getAttribute('href'));\n    }).filter(Boolean);\n\n    function getHeaderOffset() {\n      var selectors = ['#wpadminbar', '.ct-header [data-sticky*=yes]', '.ct-header', '.site-header'];\n      var offset = 0;\n\n      selectors.forEach(function (selector) {\n        document.querySelectorAll(selector).forEach(function (element) {\n          var style = window.getComputedStyle(element);\n          if ((style.position === 'fixed' || style.position === 'sticky') && element.offsetHeight) {\n            offset = Math.max(offset, element.offsetHeight);\n          }\n        });\n      });\n\n      return offset || (window.innerWidth <= 768 ? 66 : 84);\n    }\n\n    function setActive(hash) {\n      links.forEach(function (link) {\n        link.classList.toggle('is-active', link.getAttribute('href') === hash);\n      });\n    }\n\n    function updateActiveSection() {\n      var checkpoint = getHeaderOffset() + nav.offsetHeight + 42;\n      var current = sections.length ? '#' + sections[0].id : '';\n\n      sections.forEach(function (section) {\n        if (section.getBoundingClientRect().top <= checkpoint) {\n          current = '#' + section.id;\n        }\n      });\n\n      if (current) setActive(current);\n    }\n\n    links.forEach(function (link) {\n      link.addEventListener('click', function (event) {\n        var target = root.querySelector(link.getAttribute('href'));\n        if (!target) return;\n\n        event.preventDefault();\n        var y = window.pageYOffset + target.getBoundingClientRect().top - getHeaderOffset() - nav.offsetHeight - 18;\n        window.scrollTo({ top: y, behavior: 'smooth' });\n        setActive(link.getAttribute('href'));\n\n        if (history.replaceState) {\n          history.replaceState(null, '', link.getAttribute('href'));\n        }\n      });\n    });\n\n    updateActiveSection();\n    window.addEventListener('scroll', updateActiveSection, { passive: true });\n    window.addEventListener('resize', updateActiveSection);\n  })();\n<\/script>\n\n<script type=\"application\/ld+json\">\n{\n  \"@context\": \"https:\/\/schema.org\",\n  \"@graph\": [\n    {\n      \"@type\": \"WebPage\",\n      \"@id\": \"https:\/\/www.sheenmaterials.com\/applications\/thermal-test-fixtures\/#webpage\",\n      \"url\": \"https:\/\/www.sheenmaterials.com\/applications\/thermal-test-fixtures\/\",\n      \"name\": \"Thermal Interface Solutions for Automated Test Fixtures | Sheen Materials\",\n      \"description\": \"Evaluate GSF75-03 and GSF90-03 graphene thermal pads as controlled solid TIM candidates for automated cooling-module and semiconductor thermal test fixtures.\",\n      \"isPartOf\": { \"@id\": \"https:\/\/www.sheenmaterials.com\/#website\" },\n      \"about\": [\n        { \"@type\": \"Thing\", \"name\": \"Thermal interface material\" },\n        { \"@type\": \"Thing\", \"name\": \"Automated thermal test fixture\" },\n        { \"@type\": \"Thing\", \"name\": \"Graphene thermal pad\" }\n      ],\n      \"publisher\": { \"@id\": \"https:\/\/www.sheenmaterials.com\/#organization\" }\n    },\n    {\n      \"@type\": \"BreadcrumbList\",\n      \"itemListElement\": [\n        { \"@type\": \"ListItem\", \"position\": 1, \"name\": \"Home\", \"item\": \"https:\/\/www.sheenmaterials.com\/\" },\n        { \"@type\": \"ListItem\", \"position\": 2, \"name\": \"Applications\", \"item\": \"https:\/\/www.sheenmaterials.com\/applications\/\" },\n        { \"@type\": \"ListItem\", \"position\": 3, \"name\": \"Thermal Test Fixtures\", \"item\": \"https:\/\/www.sheenmaterials.com\/applications\/thermal-test-fixtures\/\" }\n      ]\n    },\n    {\n      \"@type\": \"FAQPage\",\n      \"mainEntity\": [\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Can a graphene thermal pad always replace thermal grease?\",\n          \"acceptedAnswer\": { \"@type\": \"Answer\", \"text\": \"No. Grease can achieve an extremely thin bond line on flat, well-clamped surfaces. A graphene pad should be treated as a candidate solid TIM and compared through fixture-level thermal resistance, repeatability, handling and safety testing.\" }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Does a higher thermal conductivity guarantee a lower test temperature?\",\n          \"acceptedAnswer\": { \"@type\": \"Answer\", \"text\": \"No. Total performance also depends on material thickness, contact resistance, pressure, surface flatness and heat flux. Compare the complete interface thermal resistance under the real fixture conditions.\" }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Can the same pad be reused for multiple test cycles?\",\n          \"acceptedAnswer\": { \"@type\": \"Answer\", \"text\": \"Potentially, but no universal cycle count should be assumed. Establish a replacement limit by measuring thermal drift and checking compression, cracks, contamination and edge damage over the intended service life.\" }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Are GSF75-03 and GSF90-03 electrically insulating?\",\n          \"acceptedAnswer\": { \"@type\": \"Answer\", \"text\": \"Do not assume electrical insulation. The current public product specifications do not publish dielectric strength or volume resistivity. If the interface can contact powered conductors, request an insulating construction or another qualified TIM.\" }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What information does Sheen need to prepare an A\/B test kit?\",\n          \"acceptedAnswer\": { \"@type\": \"Answer\", \"text\": \"Provide the contact drawing and area, nominal and maximum gap, clamping pressure or torque, surface materials, input power, operating temperature, current grease model and bond-line process, electrical isolation requirement and target cycle count.\" }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Will changing the TIM affect historical test limits?\",\n          \"acceptedAnswer\": { \"@type\": \"Answer\", \"text\": \"It may. The TIM is part of the measurement system. Run a correlation study against the existing method, document any systematic bias and complete change control before applying the new interface to production acceptance testing.\" }\n        }\n      ]\n    }\n  ]\n}\n<\/script>\n\n\n\n<p class=\"wp-block-paragraph\"><\/p>\n","protected":false},"excerpt":{"rendered":"<p>Overview Applications Test Method Specifications Validation Qualification Get Support Why the interface matters A repeatable test begins with a controlled interface Thermal grease can perform very well, but its bond-line thickness and coverage may change with dispensing volume, spreading method, surface condition and operator handling. In a production test fixture, those variables can become part [&hellip;]<\/p>\n","protected":false},"author":1,"featured_media":0,"parent":82,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"","meta":{"_gspb_post_css":".gsbp-310e5fa9e7dca{background-color:#f5f5f5;background-image:url(https:\/\/www.sheenmaterials.com\/wp-content\/uploads\/2026\/02\/Sheen-Electronic-Technology-Site-banner-2.webp);background-position:53% 92%;background-repeat:repeat;background-size:auto;border-bottom-left-radius:0;border-bottom-right-radius:0;border-color:#212121;border-top-left-radius:0;border-top-right-radius:0;border-style:none;border-width:0;box-shadow:none;box-sizing:border-box;color:#212121;display:block;font-family:Univers55Roman,Helvetica,Arial,sans-serif;font-size:16px;line-height:normal;margin:0 -64px;overflow-block:hidden;overflow-inline:hidden;overflow-x:hidden;overflow-y:hidden;padding:108px 64px .05008px;position:relative;text-align:start;max-width:none}@media (max-width:991.98px){.gsbp-310e5fa9e7dca{margin-left:-51.2px;margin-right:-51.2px;padding-left:51.2px;padding-right:51.2px}}@media (max-width:575.98px){.gsbp-310e5fa9e7dca{margin-left:-24px;margin-right:-24px;padding-left:24px;padding-right:24px;padding-top:65px}}.gsbp-7d3404e2ed22{background-color:transparent;background-image:none;background-position:0 0;background-repeat:repeat;background-size:auto;border-bottom-left-radius:0;border-bottom-right-radius:0;border-color:#212121;border-top-left-radius:0;border-top-right-radius:0;border-style:none;border-width:0;box-shadow:none;box-sizing:border-box;color:#212121;display:block;font-family:Univers55Roman,Helvetica,Arial,sans-serif;font-size:16px;line-height:normal;margin:0 -64px;padding:88px 64px .05008px;position:relative;text-align:start;max-width:none}@media (max-width:991.98px){.gsbp-7d3404e2ed22{margin-left:-51.2px;margin-right:-51.2px;padding-left:51.2px;padding-right:51.2px}}@media (max-width:575.98px){.gsbp-7d3404e2ed22{margin-left:-24px;margin-right:-24px;padding-left:24px;padding-right:24px;padding-top:48px}}.gsbp-12509a7459cdc{background-color:transparent;background-image:none;background-position:0 0;background-repeat:repeat;background-size:auto;border-bottom-left-radius:0;border-bottom-right-radius:0;border-color:#212121;border-top-left-radius:0;border-top-right-radius:0;border-style:none;border-width:0;box-shadow:none;box-sizing:border-box;color:#212121;column-gap:32px;display:flex;font-family:Univers55Roman,Helvetica,Arial,sans-serif;font-size:16px;justify-content:space-between;line-height:normal;margin:0 auto;padding:0;row-gap:48px;text-align:start;max-width:1192px;flex-wrap:nowrap;align-items:normal}@media (max-width:991.98px){.gsbp-12509a7459cdc{margin-left:0;margin-right:0}}@media (max-width:575.98px){.gsbp-12509a7459cdc{row-gap:41.272px;flex-wrap:wrap}}.gsbp-a330745c18e59{align-self:center;background-color:transparent;background-image:none;background-position:0 0;background-repeat:repeat;background-size:auto;border-bottom-left-radius:0;border-bottom-right-radius:0;border-color:#212121;border-top-left-radius:0;border-top-right-radius:0;border-style:none;border-width:0;box-shadow:none;box-sizing:border-box;color:#212121;display:block;flex-basis:42%;font-family:Univers55Roman,Helvetica,Arial,sans-serif;font-size:16px;line-height:normal;margin:0;overflow-wrap:break-word;padding:0;text-align:start;word-break:break-word;min-width:0;width:100%}@media (max-width:575.98px){.gsbp-a330745c18e59{flex-basis:100%;flex-grow:1}}.gsbp-2c91cb8abe4c38,.gsbp-3cf4ba34540c6,.gsbp-9c63461cfeab08,.gsbp-a756be0{background-color:transparent;background-image:none;background-position:0 0;background-repeat:repeat;background-size:auto;border-bottom-left-radius:0;border-bottom-right-radius:0;border-top-left-radius:0;border-top-right-radius:0;border-style:none;border-width:0;box-shadow:none;box-sizing:border-box;overflow-wrap:break-word;text-align:start}.gsbp-9c63461cfeab08{border-color:#212121;color:#212121;display:block;font-family:Univers55Roman,Helvetica,Arial,sans-serif;font-size:16px;line-height:normal;margin:0;padding:.05008px 0;position:relative;word-break:break-word}.gsbp-2c91cb8abe4c38,.gsbp-3cf4ba34540c6,.gsbp-a756be0{padding:0}.gsbp-2c91cb8abe4c38{border-color:#044a34;color:var(--wp--preset--color--palette-color-6, var(--theme-palette-color-6, #ffffff));display:block;font-family:Univers57Condensed,Helvetica,Arial,sans-serif;font-size:clamp(2.125rem,.3472rem + 3.7037vw,3.125rem);line-height:1.08;margin:0;font-weight:400;max-width:784px}.gsbp-3cf4ba34540c6,.gsbp-a756be0{border-color:#212121;font-family:Univers55Roman,Helvetica,Arial,sans-serif;font-size:16px;word-break:break-word}.gsbp-a756be0{color:var(--wp--preset--color--palette-color-6, var(--theme-palette-color-6, #ffffff));display:block;line-height:1.5;margin:16px 0 0;max-width:784px}.gsbp-3cf4ba34540c6{align-items:center;color:#212121;column-gap:32px;display:flex;flex-wrap:wrap;line-height:normal;margin:32px 0 0;row-gap:32px}@media (max-width:575.98px){.gsbp-3cf4ba34540c6{column-gap:24px;margin-top:24px;row-gap:24px}}.gsbp-303378fd1e45b8,.gsbp-49654a9490aad{background-image:none;background-position:0 0;background-repeat:repeat;background-size:auto;box-shadow:none;box-sizing:border-box;font-size:16px;margin:0;overflow-wrap:break-word;word-break:break-word}.gsbp-303378fd1e45b8{background-color:transparent;border-bottom-left-radius:0;border-bottom-right-radius:0;border-color:#212121;border-top-left-radius:0;border-top-right-radius:0;border-style:none;border-width:0;color:#212121;display:block;font-family:Univers55Roman,Helvetica,Arial,sans-serif;line-height:normal;padding:0;text-align:start}.gsbp-49654a9490aad{align-content:center;align-items:center;background-color:#df6d27;border-block-end-style:solid;border-block-start-style:solid;border-bottom-left-radius:9999px;border-bottom-right-radius:9999px;border-inline-end-style:solid;border-inline-start-style:solid;border-color:#df6d27;border-top-left-radius:9999px;border-top-right-radius:9999px;border-style:solid;border-width:1.06667px;caret-color:#fff;color:#fff;column-rule-color:#fff;cursor:pointer;display:inline-flex;font-family:Univers65Bold,Helvetica,Arial,sans-serif;font-weight:700;justify-content:center;line-height:1.5;padding:13px 32px 7px;text-align:center;transition-duration:.16s;transition-property:all;text-decoration:none;height:100%;width:100%}@media (max-width:575.98px){.gsbp-49654a9490aad{border-width:.8px}}.gsbp-22ff8fd4aa8238{align-self:center;background-color:transparent;background-image:none;background-position:0 0;background-repeat:repeat;background-size:auto;border-bottom-left-radius:16px;border-bottom-right-radius:16px;border-color:#212121;border-top-left-radius:16px;border-top-right-radius:16px;border-style:none;border-width:0;box-shadow:none;box-sizing:border-box;color:#212121;display:block;flex-basis:40%;font-family:Univers55Roman,Helvetica,Arial,sans-serif;font-size:16px;line-height:normal;margin:0;overflow-wrap:break-word;padding:0;text-align:start;word-break:break-word;min-width:0;width:100%}@media (max-width:575.98px){.gsbp-22ff8fd4aa8238{flex-basis:100%;flex-grow:1}}.gsbp-0df34fa74af62{border-bottom-left-radius:0;border-bottom-right-radius:0;border-top-left-radius:0;border-top-right-radius:0;border-style:none;display:block;margin:0;overflow-wrap:break-word;word-break:break-word}.gsbp-0df34fa74af62,.gsbp-74f807140889b8,.gsbp-bd3c2b4f718298{background-color:transparent;background-image:none;background-position:0 0;background-repeat:repeat;background-size:auto;border-color:#212121;border-width:0;box-shadow:none;box-sizing:border-box;color:#212121;font-family:Univers55Roman,Helvetica,Arial,sans-serif;font-size:16px;line-height:normal;padding:0;text-align:start}.gsbp-74f807140889b8{object-position:52% 46%;border-bottom-left-radius:16px;border-bottom-right-radius:16px;border-top-left-radius:16px;border-top-right-radius:16px;border-style:solid;display:inline;margin:0;overflow-wrap:break-word;vertical-align:bottom;word-break:break-word;height:auto;max-width:100%}.gsbp-bd3c2b4f718298{border-bottom-left-radius:0;border-bottom-right-radius:0;border-top-left-radius:0;border-top-right-radius:0;border-style:none;clear:both;display:flex;margin:24px -64px -2px;position:relative;max-width:none;max-height:88px;height:8%}@media (max-width:991.98px){.gsbp-bd3c2b4f718298{margin-left:-51.2px;margin-right:-51.2px}}@media (max-width:575.98px){.gsbp-bd3c2b4f718298{margin-left:-24px;margin-right:-24px}}","footnotes":"","_llm_markdown_disabled":false},"class_list":["post-3833","page","type-page","status-publish","hentry"],"_links":{"self":[{"href":"https:\/\/www.sheenmaterials.com\/it\/wp-json\/wp\/v2\/pages\/3833","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.sheenmaterials.com\/it\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/www.sheenmaterials.com\/it\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/www.sheenmaterials.com\/it\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.sheenmaterials.com\/it\/wp-json\/wp\/v2\/comments?post=3833"}],"version-history":[{"count":5,"href":"https:\/\/www.sheenmaterials.com\/it\/wp-json\/wp\/v2\/pages\/3833\/revisions"}],"predecessor-version":[{"id":3915,"href":"https:\/\/www.sheenmaterials.com\/it\/wp-json\/wp\/v2\/pages\/3833\/revisions\/3915"}],"up":[{"embeddable":true,"href":"https:\/\/www.sheenmaterials.com\/it\/wp-json\/wp\/v2\/pages\/82"}],"wp:attachment":[{"href":"https:\/\/www.sheenmaterials.com\/it\/wp-json\/wp\/v2\/media?parent=3833"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}